Environmentally friendly thermal insulation materials for roofs
As a specialized company producing materials for flat roof insulation, BAUDER POLSKA Sp. z o.o. was a pioneer in the field of green roof buildings, developing and marketing the first bitumen membrane resistant to root overgrowth. Today's return to ecological solutions, attention to reducing operational energy losses in construction, have made the green roof a must-have roof system.
Bauder thermal insulation materials
© BAUDER
Green roofs
Advantages:
- reduction of the heating temperature of the roofing elements (on a green roof the maximum temperature difference does not exceed 30°C)protection of sensitive elements (responsible for the tightness of the roofing) against low temperatures - frost and UV radiation
- reduction of heat loss resulting from conduction phenomena by approx. 5%, and as a result of ventilation by 5 to 50%
- prevention of mechanical damage, as well as increased protection and fire resistance of the roof covering
- suppression of external noise by 40-50 dB
- improving the microclimate by lowering the air temperature directly above the green roof by 3-5°C while regulating the relative humidity of the air
- reduction by approx. 50% of the amount of rainwater discharged through the rainwater drainage system in the case of thin-layer extensive greening systems, and with a layer thickness of, for example, 75 cm, a reduction of up to 90%
- improving the aesthetics of the building through additional green leisureareas connected directly to the apartment
- increase the service life of roofing elements by up to 2-3 times due to the shielding effect against atmospheric, external factors. Gardens on roofs are established on ceilings, which can carry additional loads of 100-450 kg/m2, depending on the method of greening a particular roof
- greening: intensive roof greening systems provide almost unlimited possibilities for greenery and, when properly executed, roofs can be used as gardens.
Bauder thermal insulation materials
© BAUDER
BauderPIR - thermal insulation materials
The company BAUDER POLSKA Sp. z o.o. is one of the largest manufacturers of panels made of rigid polyurethane foam, an insulator with extraordinary quality parameters. At a time of ever-increasing requirements for thermal insulation due to environmental concerns and the validity of energy-saving guidelines, the product sold under the brand name BauderPIR has become an indispensable material.
Advantages:
- High thermal insulation performance
- Stability and compressive strength of BauderPIR
- Temperature resistance
- Chemical and biological resistance
- Fire resistance of PIR foam on lightweight steel structures.
Bauder thermal insulation materials
© BAUDER
In order to provide optimal solutions for different types of flat roofs, it is necessary to use different boards. For industrial roofs, a possibly lightweight large-format board is very suitable, while for roofs with smaller areas to be covered with weldable membranes, boards of other formats are necessary.
Bauder thermal insulation materials
© BAUDER
BauderECO thermal insulation materials
Biomass and recycled materials BauderECO roof insulation are lightweight and handy thermal insulation elements with tongue and groove joints around the boards are compression resistant and can be walked on. It is possible to install the thermal insulation and a second drainage layer in one work cycle. BauderECO consists of:
- about 66% biomass, which is the insulation core. This includes plant stalks and leaves, as well as threshed corn cobs.
- About 4% from recycled raw materials. Production waste is collected and recycled by us.
- About 4% from lime from shells. Shells are a waste product in the food industry. We create a protective covering layer from the shells.
The special fabric on top of BauderECO S thermal insulation consists of a variety-pure type of PP nonwoven fabric, which can be recycled after use.
Bauder thermal insulation materials
© BAUDER
FPO roof membranes of the highest class
BauderTHERMOPLAN is a modern waterproofing system of the absolute highest class. It sets standards in safety, ease of installation and longevity. BauderTHERMOPLAN roofing membranes based on flexible polyolefins (FPO) are manufactured at Bauder's state-of-the-art production facility in Schwepnitz. The FPO-PP material base has proven itself to be excellent over many years of practice. The system is particularly suitable for use on light industrial roofs.
Advantages:
Completeness in the system
Available in various thicknesses and widths. A large selection of accessories facilitates installation and enables complete solutions.
Wide range of applications
Suitable for all load-bearing structures of lightweight roofs. The membranes are bitumen-compatible and resistant to root overgrowth according to FLL guidelines. In most cases, the use of an additional separation layer can be dispensed with.
Long-lasting protection
It is resistant to UV radiation, weathering, and is also resistant to aging.
Secure and quick connection of plants
It is laid loose and welded on the laps with hot air. They can be joined without labor-intensive preparation. Protection from wind suction forces is achieved by mechanical fastening or with ballast.
Environmentally friendly
Are free of halogens, plasticizers and heavy metals. At the end of their useful life, the films can be recycled or thermally disposed of.
For more information, visit the company's BAUDER POLSKA Sp. z o.o. page on the PdA portal.
