AIR CONDITIONERS AND HEAT PUMPS WITHOUT AN OUTDOOR UNIT
All inside the facility
A classic air-conditioning system consists of indoor units, and an outdoor unit (chiller), which gives off energy to the atmosphere. It is not always possible to install the chiller outside. Is it possible to omit it and still provide functional air conditioning? YES!
MONOKLIMA external blinds
EKO-INSTAL
Monoklima brand specializes in the promotion and distribution of specific air conditioners mounted entirely indoors. The available devices allow both cooling and reheating of rooms in buildings where it is impossible or difficult to install a standard solution with an outdoor unit. For example, in historic buildings where the facade cannot be significantly interfered with, or where its installation involves additional difficulties.
Monoclimate - air-to-air monoblocks (compacts), which need direct access to the outside air - usually through 2 openings in the exterior wall. The representative of this category are INNOVA air conditioners of the "2.0" series. Units with excellent neutral design, high quality, small depth and very quiet. They allow cooling and reheating of rooms, they can be mounted on the wall both high and at the very floor, and recently a horizontal ceiling version "CEILING" is available.
MONOCLIMA Innova 2.0 MINI
EKO-INSTAL
Monoklima - indoor air-to-air splits and multisplits, ideologically similar to standard air conditioners - have a supply unit (or several) and a separate unit (chiller) with a compressor. The difference is that the unit is mounted internally, for example, in a utility room, attic or basement - in a place with access to outside air. It is compact, quiet, efficient and invisible to the outside world.
A slightly different but interesting device is an indoor "3in1 MONO" air-to-water heat pump with a capacity of up to 10 kW ( heating + cooling + hot water), to which you can connect any fan coil units (fancoils), including versions for installation in walls, ceilings, floors. This allows you to build a water heating and cooling system entirely inside a single unit.
MONOKLIMA Innova 2.0
EKO-INSTAL
Monoclimate - monoblocs, splits and multisplits "water" (water-air) are devices that work similarly to standard ones, but use water for heat dissipation. Thus, they do not need access to outside air and can be placed anywhere water can be supplied and discharged. When connecting to running water, you have to take into account the considerable amount (and cost) of water used. Another option is to connect to closed water circuits so-called "water loop" used in larger facilities.
FAN COILS DEDICATED TO RESIDENTIAL BUILDINGS
Many mounting variants give great
flexibility in terms of power
and space arrangement
FÄRNA - an elegant, compact and at the same time quite powerful model, combines high technology and attention to aesthetics, characteristic of innovative Innova products. FÄRNA fan coils through good neutral design, small dimensions, soft curves and the possibility of painting are well suited to any space. The two models FÄRNA BIG and FÄRNA SMALL are an effective source of heat or cooling with virtually no acoustic impact.
Innova FÄRNA
© EKO-INSTAL
DUCTO MULTI is a unique solution on the market - duct models that allow you to operate up to 5 independent zones (rooms) with a single unit. In each zone you can maintain a different temperature or turn it off. Horizontal versions are available.
DUCTO advanced recessed duct units, with higher capacities, which use very quiet fans with smoothly modulated speed. They are designed for horizontal and vertical installation.
Innova AirLeaf
EKO-INSTAL
AirLeaf - the basic model of fan coil with the possibility of vertical and horizontal installation, also wall and ceiling versions. Exceptionally flat (13 cm), quiet, a lot of control options, good aesthetics allow installation in any space. Built-in wall/ceiling models have a unique option - the front panels are designed to be flush with the wall/ceiling.
Filomuro - typical models for installation in the upper part of the room and for installation in the wall. Depth of only 13 cm, excellent design, quiet operation, many control options are some of the many advantages of Innova Energie fan coils.
Filoterra - fan coils for installation in the floor, dedicated to spaces with large glazing.
The possibility of built-in in false ceilings and wall recesses minimizes the impact on the aesthetics, cleanliness of the form of the rooms, leaving only the wall grille as a visible element.
Innova Filomuro built-in
EKO-INSTAL
FARNA, AirLeaf, Filomuro compact units have steel housings. Their simple disassembly makes it possible to professionally change the color of the unit.
A large number of variants of control of fan coils allows individual control, as well as central control useful in larger facilities.
For more information, visit the company's {tag:Manufacturer} page on the A&B portal.
